Auman environmental protection material ** to introduce you to the door and window sealant this product precautions, I hope you understand together.

Precautions for using door and window sealant:

1. Open the original package and check whether there are obvious particles and sundries.

2, coating speed should not be too fast, in case not to end.

3. The coating does not end or the press wheel lifts, and the time of pressing down is too short.

The above pictures are provided by door and window sealant manufacturers

4. The placement time of the coated aluminum enclosure is not too long, otherwise the effect of bonding and sealing will be affected.

5, such as the deviation of the transmission belt should be corrected in time, such as the transmission belt adhesive too much should be removed in time, if necessary, can be daubed with a small amount of paraffin to prevent adhesive tape.

6. Apply.. The sealant should be pressed in a short time to avoid the impact of environmental temperature on product adhesion. After rolling, the insulating glass that has not been coated with a second sealant should be placed horizontally. In a short time, it can be placed vertically, but it can not collide to avoid unnecessary dislocation.

7. Before making double channel insulating glass, necessary compatibility test must be carried out on double channel sealant to prevent the two kinds of sealant from being dissolved.

      Door and window sealant and other related product information, consulting professional Omann environmental protection materials.